Introduction Lately, there have been several users having issues getting a Nissan ECU with a 20×2 header that looks like it should be compatible with Nismotronic to work.  There are some extremely subtle differences between the ECUs that do and do not work. Identifying Problematic ECUs All of the ECUs that we have seen so […]

Introduction The hardware portion of the NEMU tuning package requires installation in an ECU to be functional.  This install is NOT for beginners, although it is not extremely difficult with the correct tools.  This article will walk you through the install from start to finish with lots of pictures along the way.  If you still […]

About These ROM boards are for Nissans that use a 64k program with a 20×2 header.  These boards require TWO 512k chips such as the C2 SST27SF512 chip that we sell or a 27C512.  They require the same ROM image to be burned into both chips.  They do NOT support switching between ROMs – single […]

About The Nemu+Nismotronic Tuning Package is a complete, single-vehicle solution. High-speed datalogging, emulation, onboard storage, and advanced custom ROM options: these features are available nowhere else! All the necessary ingredients for a complete turnkey tuning package are included: NEMU Emulation and Datalogging Hardware: Installs entirely within ECU, uses a single USB connection for logging and […]

Introduction The SocketBooster 1.0 exists to provide active conditioning for signals from our Ostrich2.0 and ChipExtender products.  In some circumstances, the logic levels generated by these devices do not meet the specifications of the target device you are trying to use them in.  The SocketBooster remedies this issue by essentially amplifying and conditioning the signal. […]

Versions This is the documentation for the Nissan Boards.  At this point, there are only one version of the boards, 1.1nm  As future revisions to the board are produced, this page will be updated. Applications These boards are designed for S13 and B13 applications.  They will NOT work with S14a ECUs that have a 20×2 […]

Many Nissans can use our tools to reprogram their factory ECUs. Types of Nissan Computer Trivially chippable Nissans fall into several categories: 28 Pin EPROM (VG30DETT 300ZX Twin turbo, KA24E 240SX, RB26DETT R32 Skyline GTR, …) – If you see a 28 pin EPROM inside the ECU, this is your application.  Ostrich 2.0 works in […]

Tuner Pro is a piece of software written by Mark Mansur that is compatible with a great number of vehicles and ECUs. Download TunerPro here Originally written to modify GM and Ford binaries, the uniqueness of TunerPro is its ability to have Definitions. While this adds a slight layer of complexity to the end user, […]