Introduction Many of our products have physical switches on them to change device behavior.  Unfortunately, we’ve noticed quite a few problems related to these switches.  Over time, sometimes switches fail to behave as you would expect them to.  We suspect this is due to oxidation on the contacts, dust or another slow-acting cause.   Affected […]

The ALDU1 is a simple logging cable.  It attaches to the USB port of your PC and to the ALDL logging port on your vehicle.  It allows your PC to communicate with your ECM. Basic Connectivity The ALDU1 uses a USB connection to talk to your PC.  It uses the same FTDI drivers that all […]

Introduction Among other things, TunerPro RT brings a new definition format, the ADX.  This is an extended version of the previous file format, ADS.  The file formats are NOT compatible, but you can convert between them fairly simply.  Unfortunately, the automatic conversion utility in TunerPro isn’t perfect so this guide exists to help you achieve […]

94 and 95 were also kind of odd years for GM computers as they transitioned toward OBD2. There are several groups of ECMs. 94-95 LT1,LT4,LTx: These can be tuned via TunerCATS ( link ) with the $EE definition and an ALDU1+CABL1 (94 – square ALDL style connector) or ALDU1+CABL2 (95 “D” shape OBD2 connector).  These […]

(eventually this page will have more information) Basics When we talk about “OBD1” GM vehicles, we mean vehicles made from (approximately) 1986 to 1995.  These cars used several different types of engine controller – some have one injector for each cylinder (Tuned Port Injection, or TPI along with the LTx motors) while some have fewer […]

FTDI provide a utility called “FTCLEAN” that forcibly removes drivers from your computer.  WARNING: THIS WILL BREAK ALL DEVICES THAT USE FTDI DRIVERS, NOT JUST MOATES HARDWARE. Do not attempt this procedure unless reloading the drivers has failed to restore your devices to full functionality.  You should not be thinking about doing this unless you […]

About Moates USB Products Almost all Moates.net products have a USB interface to connect to a computer. (ALDU1, HULOG, Hondalog, BURN1/2, Ostrich 1/2, Roadrunner, Quarterhorse, Jaybird) Fortunately, all Moates.net products with a USB interface use the same USB support chip so they can all use the same drivers. This makes it easy for you – […]

USB Drivers are needed for almost all products.  You only need one driver package for ALL Moates USB products.  One for all and all for one?  🙂 As a rule of thumb, the WHQL drivers which will be downloaded automatically will work fine.  However, it is recommended that you use the drivers from our site with […]

OVERVIEW The ALDU1 is a datalogger designed to work with OBD I GM vehicles. The ALDU1 is compatible with the CABL1 and the CABL2, which are interface cables that connect to GM OBD I and OBD II vehicle respectively. The ALDU1 can be purchased by itself, or as a combo with either the CABL1 or […]