Intro EFI Live Commercial Scan and Tune comes with two VIN licenses. To tune more vehicles, you must provide us some information when you purchase VIN or stream licenses. Requesting a New License Plug in your EFI Live FlashScan handheld to your laptop.  Its display should be lit up. Double click on the “EFILive V7.5 […]

About WinALDL is software to datalog on GM vehicles that use the old 160 baud rate.  This includes but is not limited to vehicles using a 1227747 and 1227165 ECM.  Most older TBI GM computers will speak this protocol.  WinALDL does NOT speak to newer GM OBD1 vehicles that use 8192 baud communication. WinALDL is […]

Our products (AutoProm, ALDU1) work with TTS Datamaster.  We do not sell TTS Datamaster – this page is provided for informational purposes only.  For more information, please see Datamaster’s website.

Our OBD1 tuning products ( AutoProm, ALDU1+CABL1, BURN2, Ostrich) will work with CATS OBD1 Tuner.  We do not sell this package – this page is provided for information purposes only.  For more information, visit TunerCat.com

Introduction TunerCat OBD2 Tuner is a software package that allows tuning of 96-current GM vehicles.  For some early 96-97 vehicles, it is often the only solution. TunerCat OBD2 Tuner must be purchased with our RoadRunner hardware (either with a complete RoadRunner ECM or just a RoadRunner Guts kit)  due to licensing restrictions.  TunerCat OBD2 Tuner […]

Introduction Among other things, TunerPro RT brings a new definition format, the ADX.  This is an extended version of the previous file format, ADS.  The file formats are NOT compatible, but you can convert between them fairly simply.  Unfortunately, the automatic conversion utility in TunerPro isn’t perfect so this guide exists to help you achieve […]

Introduction Ever wish your favorite Moates emulator would work with your favorite ROM editor software that doesn’t have native support for our products?  EmUtility (from the author of TunerPro) allows you to use Moates emulators with any software that can spit out a binary (bin) or hexadecimal (hex) format file.  It supports the Ostrich1, Ostrich2, […]

Although quite outdated, this is a very nice PDF tutorial written up by Darren Kattan. Check it out by clicking HERE

Our file manager is no longer available for access due to a website crash.  Almost all of the content is available at the excellent forums http://www.gearhead-efi.com You can also click this for a direct link to the files section: link

Binary Editor 2010 In order to issue you a license for Binary Editor, you must first download and install the software. ( http://www.eecanalyzer.net )  Once you have downloaded and installed the software, go to the “Register” menu at the top of the screen and select “Register Binary Editor” Next, you will be presented with a […]

Neptune RTP is a tuning hardware/software package for tuning OBD1 Honda and Acura vehicles developed by James Holy at HR Tuning.  Quality hardware, quality software and solid support combine to provide what is arguably the most comprehensive package available for tuning these cars.   More information can be found at the official Neptune site here.  The Neptune […]

eCtune is a ROM Editor available for Hondas. It is written by Calvin Baank and has an exhaustive list of features. eCtune has very structured licensing. It is important to note that most eCtune tunes will only work when run off the Ostrich or Demon. This means a separate Ostrich must be present in each […]

Tuner Pro is a piece of software written by Mark Mansur that is compatible with a great number of vehicles and ECUs. Download TunerPro here Originally written to modify GM and Ford binaries, the uniqueness of TunerPro is its ability to have Definitions. While this adds a slight layer of complexity to the end user, […]

Download Flash & Burn here. Flash & Burn is a software package used with the Burn1 and Burn2 EEPROM burners, as well as the Autoprom (APU1). Note, many tuning software packages (like CROME and Hondata) can interface with these burners directly making this software not necessary.

The RoadRunner works exclusively with EFILive, which is compatible with all LS1 PCMs.

  CROME is a ROM-Editor written primarily for OBD I Honda ECUs. A Pro version is available for $149 which unlocks a hidden data-logging feature. CROME works natively with the following Moates hardware: Ostrich (both 1.0 and 2.0) Burn1 Burn2 HuLog (both Xtreme HuLog and Original HuLog) HondaLog [youtube]http://www.youtube.com/watch?v=BKpLKHEwWXY[/youtube]