Hulog/Hondalog Installation of Honda-Based USB Datalogging Tools There are two tools available for datalogging on Honda ECUs from www.moates.net and they include the HULOG and the HondaLog. HULOG: The HULOG comes in a plastic enclosure and ONLY requires a pin swap if it is an older unit. All the new units come with 1:1 connector […]

Although quite outdated, this is a very nice PDF tutorial written up by Darren Kattan. Check it out by clicking HERE

FTDI provide a utility called “FTCLEAN” that forcibly removes drivers from your computer.  WARNING: THIS WILL BREAK ALL DEVICES THAT USE FTDI DRIVERS, NOT JUST MOATES HARDWARE. Do not attempt this procedure unless reloading the drivers has failed to restore your devices to full functionality.  You should not be thinking about doing this unless you […]

About Moates USB Products Almost all Moates.net products have a USB interface to connect to a computer. (ALDU1, HULOG, Hondalog, BURN1/2, Ostrich 1/2, Roadrunner, Quarterhorse, Jaybird) Fortunately, all Moates.net products with a USB interface use the same USB support chip so they can all use the same drivers. This makes it easy for you – […]

USB Drivers are needed for almost all products.  You only need one driver package for ALL Moates USB products.  One for all and all for one?  🙂 As a rule of thumb, the WHQL drivers which will be downloaded automatically will work fine.  However, it is recommended that you use the drivers from our site with […]

A Word of Warning This article was accurate as of the time it was written (2009) but things may have changed.  At Moates.net, we rely on information from our users about what works and what doesn’t work.  Please investigate on PGMFI.org and elsewhere to confirm the information you find here!  Things may have changed and […]

Overview The HuLog, HondaLog, and Xtreme HuLog are USB datalogging adapters that are used to datalog Honda ECUs. Functionally the devices are identical, however the HuLog/Xtreme HuLog come in ABS plastic enclosures for protection. Also, the Xtreme HuLog will retain its COM port assignment regardless of what USB port is used. Tips and Tricks To […]

Summary Only certain Hondas can be tuned using our hardware. In short, these are any vehicles that run a B, D, H, or F (Accord) series engine with a distributor and can run an OBD I ECU. Whether they accept these ECUs natively or via an OBD II to OBD I or OBD0 to OBD […]