TPRT product link and articles
Introduction We probably get 20 emails a week of the form: “Dear Moates, My name is ________ and I have a _________ Ford. Can I use your products to tune my car/truck/van/etc. ?” Identifying J3 Port ECMs Our Ford products (F3 chip module, Quarterhorse) will work on pretty much any ECM that has a J3 […]
Introduction The check sum routine is a piece of the ECU code that checks to make sure the program is valid. When you use the “Save” or “Save As…” commands in TunerPro, TunerPro updates the checksum automatically. This is why this is not a concern when burning chips – the checksum is updated when you […]
Introduction The QuarterHorse Ford tuning tool is supported by TunerPro RT version 5 and newer. This document will briefly cover the steps necessary for using the QuarterHorse with TunerPro RT. General Setup First, the QuarterHorse must have its drivers properly installed. The QuarterHorse uses the same FTDI device drivers as most of our other products. […]
Introduction In addition to any definitions you might find on TunerPro’s Webpage or TI Performance‘s webpage, there are also some definitions we try to maintain. If you are going to use the QuarterHorse with any of the strategies on this page with TunerPro, these are the definitions we recommend you use. TunerPro Defs from Moates […]
This article provides a full overview of options and procedures for Ford-based tuning solutions. Everything is discussed, including year/model coverage, hardware compatibility, software licensing, cost breakdown, and tuning strategies. Read through this evolving article if you’re interested in Ford EEC tuning.
“I have a Ford. What do I need to tune my car?” is an email we frequently receive. Hopefully this page will provide some answers. We also often get asked, “Can I use your product to let me put _______ on my engine?” The answer to this is very simple: our products let you tune […]
Tuner Pro is a piece of software written by Mark Mansur that is compatible with a great number of vehicles and ECUs. Download TunerPro here Originally written to modify GM and Ford binaries, the uniqueness of TunerPro is its ability to have Definitions. While this adds a slight layer of complexity to the end user, […]