Introduction The SocketBooster 1.0 exists to provide active conditioning for signals from our Ostrich2.0 and ChipExtender products.  In some circumstances, the logic levels generated by these devices do not meet the specifications of the target device you are trying to use them in.  The SocketBooster remedies this issue by essentially amplifying and conditioning the signal. […]

G2 G2 TBI-Style 2732-to-29C256 Adapter Installation Instructions:Here is a pictorial depiction of a G2 installation in a TBI-style ECM. It shows the following: 1) Disassembly and removal of stock socket body. – Take note of the ‘stock’ 2732A chip orientation. Your 2732A chip will probably be in a little plastic holder. – Try and overcome […]

(eventually this page will have more information) Basics When we talk about “OBD1” GM vehicles, we mean vehicles made from (approximately) 1986 to 1995.  These cars used several different types of engine controller – some have one injector for each cylinder (Tuned Port Injection, or TPI along with the LTx motors) while some have fewer […]