RRLS1 product link and articles
Introduction TunerCat OBD2 Tuner is a software package that allows tuning of 96-current GM vehicles. For some early 96-97 vehicles, it is often the only solution. TunerCat OBD2 Tuner must be purchased with our RoadRunner hardware (either with a complete RoadRunner ECM or just a RoadRunner Guts kit) due to licensing restrictions. TunerCat OBD2 Tuner […]
Notes from EFI Live’s Paul Blackmore regarding using the auto-tuning feature of EFI Live with Moates hardware: Check both axis of the VE table in the tuning tool to make sure the MAP and RPM headings (the ones colored sky-blue) have link PIDs associated with them. The link PIDs are usually displayed as {Link: SAE.MAP} […]
When you set up a Roadrunner in a vehicle, you will often need to force a ‘hard reset’ of the Roadrunner PCM. This is particularly true if you are using a custom OS or changing OS type. For using EFI Live, perform the following: Open up the software, and get the EFI Live Roadrunner Control […]
Shops and Resellers: If you are interested in purchasing Moates.Net products in bulk, or would like to be a reseller of our products, the following discount structure is available to you: 10% off for 10 – 19 pieces more of a given item 15% off for 20 – 49 20% off for 50 – 99 […]
Our Philosophy: We are a small technically-oriented outfit that focuses on product development not fancy packaging, phone support, and marketing. We bring you high-quality, value-priced products aimed at self-starters willing to read documentation, learn independently and most importantly try things on their own without someone providing guidance every step of the way. About Moates.Net and […]
(eventually this page will have more information) The main product that we make for 98+ GM vehicles is the RoadRunner emulator that allows realtime changes to be made to a LS1 ECM. The RoadRunner is designed to be used with either EFI Live or TunerCATS software. EFI Live is a comprehensive tuning software package that […]
FTDI provide a utility called “FTCLEAN” that forcibly removes drivers from your computer. WARNING: THIS WILL BREAK ALL DEVICES THAT USE FTDI DRIVERS, NOT JUST MOATES HARDWARE. Do not attempt this procedure unless reloading the drivers has failed to restore your devices to full functionality. You should not be thinking about doing this unless you […]
About Moates USB Products Almost all Moates.net products have a USB interface to connect to a computer. (ALDU1, HULOG, Hondalog, BURN1/2, Ostrich 1/2, Roadrunner, Quarterhorse, Jaybird) Fortunately, all Moates.net products with a USB interface use the same USB support chip so they can all use the same drivers. This makes it easy for you – […]
USB Drivers are needed for almost all products. You only need one driver package for ALL Moates USB products. One for all and all for one? 🙂 As a rule of thumb, the WHQL drivers which will be downloaded automatically will work fine. However, it is recommended that you use the drivers from our site with […]
The RoadRunner is the only available full blown emulator for LS1 PCMs – unlike other “emulation” software, the entire contents of the flash is emulated Real-Time, not just certain maps. It can also be used as a general purpose emulator in custom applications (Bosch Motronic, BMW, Miata, Nissan, …) It is designed for PSOP44 chips […]
About Firmware Updates and a Warning Periodically we release new firmware for our products. We generally recommend AGAINST updating firmware unless you have a very specific reason for doing so, as there is always the chance something will go wrong during an update leaving the device bricked in a state where it has to be sent […]
Introduction Although our hardware uses USB connectivity, you don’t have to be a kernel level device driver programmer or any sort of expert in the USB framework to interface our devices.Our devices simply create a virtual COM port that can be written to via all sorts of methods. Old-school Windows programmers may be familiar with […]