Introduction / Identification The Demon2, pictured above, is the newest in our line of Honda/Acura-friendly P28/P30/P72-compatible technology. Flawless realtime emulation, embedded datalogging, auxiliary ports, 16x calibration storage and encryption.   The Demon II is designed to fit inside only USDM ECUs.   If you have a JDM ECU, be sure to let us know when you […]

The Demon and Ostrich can sometimes get stuck in an odd state.  This utility will allow you to reset them to a known state. Download link  Download link 2 In order to get a device back into a sane state, you need to CHANGE the vendor ID (which software it is set up for).  Once […]

Introduction / Identification The Demon (or original Demon, Demon 1) pictured above  is the first of our integrated devices aimed at Honda/Acura-friendly P28/P30/P72 OBD1 ECUs. Flawless realtime emulation, embedded datalogging, auxiliary ports, 16x calibration storage and encryption.   The Demon is designed to fit inside both USDM and JDM ECUs including those with knock boards.   The Demon […]

This is Keebler65’s old guide. Some of the chipset and software info is a bit dated, but the techniques are good. ECU Chipping You need to add a few additional components to the original Honda ECU. It requires some soldering skills and should not be attempted unless you have soldered before. (Chances are you know […]

FTDI provide a utility called “FTCLEAN” that forcibly removes drivers from your computer.  WARNING: THIS WILL BREAK ALL DEVICES THAT USE FTDI DRIVERS, NOT JUST MOATES HARDWARE. Do not attempt this procedure unless reloading the drivers has failed to restore your devices to full functionality.  You should not be thinking about doing this unless you […]

About Moates USB Products Almost all Moates.net products have a USB interface to connect to a computer. (ALDU1, HULOG, Hondalog, BURN1/2, Ostrich 1/2, Roadrunner, Quarterhorse, Jaybird) Fortunately, all Moates.net products with a USB interface use the same USB support chip so they can all use the same drivers. This makes it easy for you – […]

USB Drivers are needed for almost all products.  You only need one driver package for ALL Moates USB products.  One for all and all for one?  🙂 As a rule of thumb, the WHQL drivers which will be downloaded automatically will work fine.  However, it is recommended that you use the drivers from our site with […]

A Word of Warning This article was accurate as of the time it was written (2009) but things may have changed.  At Moates.net, we rely on information from our users about what works and what doesn’t work.  Please investigate on PGMFI.org and elsewhere to confirm the information you find here!  Things may have changed and […]

Neptune RTP is a tuning hardware/software package for tuning OBD1 Honda and Acura vehicles developed by James Holy at HR Tuning.  Quality hardware, quality software and solid support combine to provide what is arguably the most comprehensive package available for tuning these cars.   More information can be found at the official Neptune site here.  The Neptune […]

About Firmware Updates and a Warning Periodically we release new firmware for our products. We generally recommend AGAINST updating firmware unless you have a very specific reason for doing so, as there is always the chance something will go wrong during an update leaving the device bricked in a state where it has to be sent […]