Fairly regularly we get asked something along the lines of, “I had my car tuned by Joe Bob at Fast Bob’s Racing and he used a ___________ (not ours) chip.  I want to make a few changes to the tune myself.  What do I need to do it?” Here is the answer: We do NOT officially […]

This article provides a full overview of options and procedures for Ford-based tuning solutions. Everything is discussed, including year/model coverage, hardware compatibility, software licensing, cost breakdown, and tuning strategies. Read through this evolving article if you’re interested in Ford EEC tuning.

Requirements There are two products that we sell that can read the program in a factory ECM: BURN1/BURN2 with a F2A and F2E – This setup can be used to read ECMs on the bench.  ECM does not need to be powered. QuarterHorse – This setup requires the ECM to be powered either by a […]

Introduction If you’re completely new to burning chips, you may want to take a look at the Beginners’ Guide before reading the rest of this article.  You will probably still need to read this guide in order to choose the correct programming parameters unless you’re in the situation where you’re programming a chip that is the […]

Our Philosophy: We are a small technically-oriented outfit that focuses on product development not fancy packaging, phone support, and marketing.  We bring you high-quality, value-priced products aimed at self-starters willing to read documentation, learn independently and most importantly try things on their own without someone providing guidance every step of the way. About Moates.Net and […]

“I have a Ford.  What do I need to tune my car?” is an email we frequently receive.  Hopefully this page will provide some answers. We also often get asked, “Can I use your product to let me put _______ on my engine?” The answer to this is very simple: our products let you tune […]