Introduction We probably get 20 emails a week of the form: “Dear Moates, My name is ________ and I have a _________ Ford.  Can I use your products to tune my car/truck/van/etc. ?” Identifying J3 Port ECMs Our Ford products (F3 chip module, Quarterhorse) will work on pretty much any ECM that has a J3 […]

Introduction Although you can use our Ford hardware ( F3 Jaybird QuarterHorse ) on just about any 86-2004 Ford, software is much more lacking.  Currently (2021) there are three primary software packages that support our Ford hardware – Binary Editor, TunerPro RT, EEC Editor.  Each software package has a different set of ECMs that it works […]

This article provides a full overview of options and procedures for Ford-based tuning solutions. Everything is discussed, including year/model coverage, hardware compatibility, software licensing, cost breakdown, and tuning strategies. Read through this evolving article if you’re interested in Ford EEC tuning.

Binary Editor 2010 In order to issue you a license for Binary Editor, you must first download and install the software. ( http://www.eecanalyzer.net )  Once you have downloaded and installed the software, go to the “Register” menu at the top of the screen and select “Register Binary Editor” Next, you will be presented with a […]

“I have a Ford.  What do I need to tune my car?” is an email we frequently receive.  Hopefully this page will provide some answers. We also often get asked, “Can I use your product to let me put _______ on my engine?” The answer to this is very simple: our products let you tune […]

About the QuarterHorse The QuarterHorse delivers in unparalleled fashion. It plugs into the J3 port like a chip, but can do much more. The QH hardware is compatible with all EEC-IV and EEC-V ECMs through 2004 equipped with a J3 port, allowing realtime tuning AND datalogging while the vehicle is operating.  In order to realize the capabilities […]