You will need bridge J1 on the back of the ECU. Add C49 & C50 and C91 & C92 on back C49 & C50 –> .004UF (Digikey part number 399-1230-1-nd ) C91 & C92 –> .00001UF ( digikey Part Number 399-1192-1-nd ) Add the 74hc373 SMD chip. (MFG part# SN74HC373NSR, Digi-Key Part Number 296-8310-1-ND) Add [...]

This is Keebler65′s old guide. Some of the chipset and software info is a bit dated, but the techniques are good. ECU Chipping You need to add a few additional components to the original Honda ECU. It requires some soldering skills and should not be attempted unless you have soldered before. (Chances are you know [...]

G2 G2 TBI-Style 2732-to-29C256 Adapter Installation Instructions: Here is a pictorial depiction of a G2 installation in a TBI-style ECM. It shows the following: 1) Disassembly and removal of stock socket body. – Take note of the ‘stock’ 2732A chip orientation. Your 2732A chip will probably be in a little plastic holder. – Try and [...]

Versions This is the documentation for the Nissan Boards.  At this point, there are only one version of the boards, 1.1nm  As future revisions to the board are produced, this page will be updated. Applications These boards are designed for S13 and B13 applications.  They will NOT work with S14a ECUs that have a 20×2 [...]